# Increase audio volume

URL: https://neattrim.com/tools/increase-audio-volume

Make a quiet recording louder by a fixed amount of gain, then save it in its original format. Private and done in your browser.

## Boosting a recording that is too quiet

Quiet files are everywhere: a voice memo recorded across the room, a lecture from the back of a hall, an old digitised cassette or an MP3 whose level was never set well. This page applies a fixed gain in decibels. Start with a small boost and increase until the speech is comfortable.

The limit is clipping. A digital file cannot go above its maximum level, so if the loudest part is already near the top, a large boost will flatten the peaks and cause crackle. That is why you can choose between several steps instead of an unlimited slider. When a recording has uneven levels, with some parts loud and others quiet, a simple boost will not fix it; use the normalize page, which targets a consistent loudness, or clean the noise first, since boosting also raises the hiss.

## Steps

1. **Add the quiet audio.** Drop an MP3, M4A, WAV or similar audio file onto the page, or choose one from your device.
2. **Choose how much to boost.** Pick a gain of 3, 6, 10, 15 or 20 dB. Start with 6 dB, a clearly audible step for most recordings.
3. **Listen for distortion.** Play the result and listen for crackling on loud sections; if you hear it, go back and pick a smaller boost.
4. **Download the louder file.** Save the file, which keeps the same format as the original.

## Questions

**How much louder is 6 dB?**

A 6 dB increase roughly doubles the signal level, and many listeners hear it as noticeably louder. It is a good first setting for a quiet recording.

**Why does my boosted audio crackle?**

The loudest peaks hit the maximum level and were flattened, which is called clipping. Use a smaller boost, or normalize instead.

**Will boosting also boost the background noise?**

Yes, everything is raised together. If the hiss is a problem, run the noise remover first, then boost the cleaned audio.

**Is my audio uploaded to be made louder?**

No. The gain is applied in your browser on your device, and the file never leaves it.
