LUFS and loudness for podcasts and Reels
· Neattrim editorial team
LUFS describes perceived loudness; a peak meter describes the highest signal excursions. You need both when preparing dialogue. Two recordings can have similar peaks but very different listening levels because one contains sustained speech and the other contains long silences and occasional loud hits.
Read the measurement in context
Integrated loudness summarises a programme over its measured duration. Short-term and momentary readings describe shorter windows. A true-peak measurement estimates peaks in the reconstructed signal, which can differ from the largest stored sample. Loudness range helps describe how much the programme's level varies.
Changing the selection changes what you measure. A trailer excerpt and the full episode need separate readings. Measure the actual delivery file after edits, rather than relying on a draft with a different intro or music bed.
Use a destination requirement when one exists
Apple Podcasts' audio requirements, checked on 2026-11-13, recommend overall loudness around −16 dB LKFS with a tolerance of ±1 dB and true peaks no higher than −1 dB FS. That is a documented podcast reference, not a rule for every social platform.
For Reels, do not treat a number repeated in an editing tutorial as a verified universal upload requirement. Playback can vary with the app, device and surrounding content. Use the destination's current specification when supplied, and otherwise prioritise intelligible speech, controlled peaks and a listening check after upload. This guide does not claim a verified Instagram LUFS target.
Prepare the mix in order
- Balance speakers and background music before adjusting overall loudness.
- Measure the complete programme in an editor with a loudness meter.
- Apply gain or loudness normalisation, preserving headroom for peaks.
- If the peak ceiling prevents the desired loudness, revise dynamics carefully rather than forcing more gain.
- Export, measure again and listen to the encoded result.
Volume Booster is a starting point for basic level changes. If the required meter or dynamics controls are unavailable, use an editor that provides them. A volume slider alone cannot certify a LUFS delivery target.
Why matching a target can still sound bad
A loudness meter cannot tell you whether the microphone is too far away, whether music masks words or whether compression causes audible pumping. A heavily limited mix may meet a number while sounding tiring. Keep pauses and emphasis natural.
Compare with a reference at matched playback loudness. For gain troubleshooting, read fix a quiet video without distortion.