Skip to content
Neattrim

Bitrate explained without the jargon

· Editorial team

Do it now
Compress video to size
Fit a video under an exact MB limit.

Bitrate is the amount of data used for each second of video, usually written in megabits per second (Mbps) or kilobits per second (kbps). A higher bitrate keeps more detail and makes a bigger file. File size equals bitrate times length. Pick the size you need and the bitrate follows from that.

Think of it as a budget

Imagine you are allowed 18 MB for a one-minute video. That is 144 megabits to spend over 60 seconds, so the budget is 2.4 megabits every second. The encoder spends that money on the picture and the sound. Busy scenes cost more, calm scenes cost less, and a good encoder moves the money to where it is needed.

When the budget is too small for what is on screen, you see it: blocky patches, smeared edges, banding in skies and shimmer in grass.

The formula in both directions

Size in megabytes is megabits per second times seconds, divided by 8.

Bitrate in megabits per second is the size in megabytes times 8, divided by seconds.

Examples:

A 90 second clip at 4 Mbps: 4 times 90 is 360 megabits, which is 45 MB.

A 3 minute clip that has to be 25 MB: 25 times 8 is 200 megabits, divided by 180 seconds is about 1.1 Mbps in total, including sound.

Units trip people up. Megabits and megabytes differ by a factor of 8. A lowercase b is a bit and an uppercase B is a byte. A kilobit is a thousand bits in this context.

Constant against variable bitrate

Constant bitrate (CBR) spends the same amount every second. Variable bitrate (VBR) spends more on hard moments and less on easy ones, and usually looks better for the same size. When you ask for a target file size, a good tool uses a variable approach and watches the running total to land near your number.

What numbers are sensible

There is no single correct number, because it depends on the codec, the resolution and the content. As a rough orientation for H.264 video, a talking-head clip at 720p can look fine at 1 to 2 Mbps, while fast sport at 1080p wants several times that. Newer codecs can reach a similar look with less.

Audio is separate. 128 kbps is a common choice for stereo AAC music and speech, and 64 kbps is acceptable for speech alone. Audio at 128 kbps costs about 1 MB per minute.

Four ways to set it

  1. Choose a quality preset. Simple, but you do not control the final size.

  2. Enter a target size. Best when a platform has a hard limit. The tool calculates the bitrate for you.

  3. Type a bitrate yourself. Useful when you know what you want, for example for a streaming service's spec.

  4. Lower the resolution first, then compress. Fewer pixels make every bit go further.

Why the same bitrate looks different

Two files at the same bitrate can look very different. A newer codec uses its bits better than an older one. A slow encoder setting finds savings that a fast one misses. A clean source compresses better than a noisy, grainy one. And a clip full of motion needs more than a still slide.

So treat bitrate as the budget, not a promise of quality.

Frequently asked questions

Is higher bitrate always better?

Only up to a point. Past a certain level your eyes cannot see the difference, and you are paying in file size for nothing.

What is the difference between bitrate and resolution?

Resolution is the number of pixels in each frame. Bitrate is how many bits you spend per second to describe them. A high-resolution video at a very low bitrate looks worse than a lower-resolution one at the same bitrate.

Why does my video app show a different bitrate from the file size?

Apps usually show the video bitrate alone, and the file also holds sound and a small amount of overhead for the container.

Can I raise the bitrate of a small file to improve it?

No. The detail that was thrown away is gone. Raising the bitrate in a new encode only makes a bigger file.

Related guides